Skip to content
Norwegian Eyewear Hilversum REYKJAVIK

Reykjavik Eyes Black Label Reykjavik Eyes is opgericht door de IJslandse designer Gunnar Gunnarsson. Als kind werkte Gunnar in de optiekzaak van zijn ouders waar hij zijn zomervakanties grotendeels doorbracht met het vervangen van gebroken glazen en schroeven. Dit was de juiste voedingsbodem voor Gunnar om uiteindelijk zijn eigen frames te gaan ontwerpen; het begin van Reykjavik Eyes.

Gunnar heeft drie jaar de tijd genomen om zijn oorspronkelijke idee te testen en te verfijnen. Het resultaat is baanbrekend en heeft de grenzen van het frameontwerp verlegd. Reykjavik Eyes wordt gewaardeerd om de combinatie van hoogstaande technologische toepassingen, draagbaarheid en stijl.

SELECTEER CATEGORIE

Neem, in overeenstemming met de huidige EU-wetgeving inzake gegevensbescherming, even de tijd om de voorwaarden voor het gebruik van onze services te lezen. Onze voorwaarden beschrijven onder andere hoe we gegevens gebruiken.

GLAZING GUIDELINES

Lenses are mounted as easy as a semi-rimless frame. We recommend: 

  • Using a Trivex/Polycarbonate lens, however a 1.6, 1.67 or 1.74 index lens can be used.
  • Tracing the supplied demo lens.
  • A standard inline supra glaze with a minimum lens thickness of 2.2mm.
  • A 0.8mm groove depth and a 0.55mm groove width.
  • A 0.8mm thickness either side of the groove.
  • Inserting the lens using the supra ribbon/cord supplied with the frame

We do not recommend using CR39 or a 1.56 index lens.

LENS REMOVAL DEMO

RIMLESS GUIDELINES

Rimless Glazing & Assembly Guidelines.

We recommend: 

  • Use a nylon coated plier to remove the demo lenses.
  • Remove any residue off the nylon plugs, bridge pins, screws and end pieces, taking care not to damage them.
  • For each model axis and hole position please visit: Rimless Measurements
  • Use the original nylon plugs supplied to assemble the correction lenses or sun lenses.
  • Assemble all the components using a plier with plastic inserts to prevent damaging the lens.
    To view the assembly guidelines please visit: Rimless Assembly

We do not recommend using CR39 or a 1.56 index lens.

We do recommend using a 1.59 polycarbonate or 1.61 MR8 lens as standard for all rimless frames.

Care should be taken if using acetone on a 1.59 polycarbonate lens.

AFSPRAAK MAKEN

    x